Idex Hale Sam, Руководство по эксплуатации, установке и обслуживанию

Страница: 115 / 141

99
C. Connect USB stick to USB dongle on rear of SAM Control Center. See Figure 118.
Figure 118. SAM Control Center USB Dongle
D. On Device Select MENU, touch Menu icon.
E. On Home MENU, touch More button.
F. Touch Export Data Log To USB button. Saving … appears at bottom of button.
G. Wait for Save Complete! to appear at bottom of button.
NOTES
The save may take several minutes to complete. A comma separated values file named
LogFile_SAM_UV1100.csv appears on the USB stick when the transfer completes.
If a data log file already exists on the USB stick it is overwritten by the new file.
If
Save ERROR appears the file transfer failed. Cycle the SAM system power and repeat
the entire procedure using a different USB stick.
H. Disconnect USB stick.
I. Touch Reboot to GUI button.
6.3.3.5.2 Exporting The Pump Controller Datalogger File
When directed, perform the following to transfer the current data log to a USB stick.
A.
On Pump Controller, touch and hold system options button until loading icon
completes circle and Menu screen (Figure 50, page 38) is displayed.
B. Connect USB stick to USB dongle on rear of Pump Controller. See Figure 119.
Figure 119. Pump Controller USB Dongle