Idex Hale Sam, Руководство по эксплуатации, установке и обслуживанию

Страница: 74 / 141

58
6.2.1.1 Assigning Quicksets To The Home Screen
To initially select the Quicksets displayed on the SAM Auto Mode Home screen (when none are
displayed/selected), simply touch and drag the desired discharge to the desired Quickset posi-
tion. Once the four Quicksets have been populated, no other changes/selections can be made
on this screen without a reset.
To delete the existing Quicksets or change their position on the SAM Auto Mode Home screen,
see paragraph 6.2.2.2, How To Change The Order Of Quicksets On The Home Screen (page 58).
Perform the following to assign up to four (4) Quickset buttons to the home screen.
A.
Touch and hold system options button until loading icon completes circle
(Figure 22, page 23) and Enter Password icon group appears.
B. Using password icon group, touch user/dealer password (see Table 6, page 51)
digits, then touch ENTER button, to enter Display Menu screen (Figure 24,
page 24).
C. Touch DISCHARGE QUICKSETS button to enter DISCHARGE SETTINGS screen
(see Figure 58).
.
Figure 58. Discharge Settings Screen
D. Touch and drag desired discharge valve (select from 12 listed at top of screen) to
desired Quickset position (listed at bottom of screen).
NOTES
HomeScreenQuickset1 thru HomeScreenQuickset4 display on the home screen from
the left most position to the right most position.)
Repeat this step up to three (3) times to assign multiple Quickset buttons to the home
screen.
E. Touch Home button.
6.2.1.2 How To Change The Order Of (Or Delete) Quicksets On The Home Screen
To delete the Quicksets already displayed on the SAM Auto Mode Home screen, touch the RESET
button on the DISCHARGE SETTINGS screen (see Figure 58). To change the order of the Quick-
sets that are displayed on the SAM Auto Mode Home screen also touch the RESET button and