IDEC SE2L-H05LPC, Руководство пользователя

Страница: 84 / 152

SE2L User’s Manual (SE9Z-B1865)
83
7.4.3 Installing the driver in Windows XP
This section explains the SLS USB driver installation method in Windows XP. Follow the steps below to
install the driver.
a) Connect the SE2L to PC’s USB port. When PC detects the new hardware open the “Found
New Hardware Wizard”
b) Select “Install from a list or specific location (Advanced)”. Insert the CD and click [Next>]
c) Select “Search for the best driver in these locations”. Select “Include this location in the search”, and
click [Browse]
d) Select the “Driver” folder and click [OK]
e) Click [Next>]
f) The Wizard starts searching for the driver and dialogue box is shown.
g) Windows starts installing the SLS USB driver.
h) After clicking [Finish], the dialogue appears indicating new hardware is successfully installed.
To confirm the successful installation go to computer’s device manager and expand the “Ports (COM and
LPT)” list. “SLS USB Device Driver” should appear as one of the COM ports.
7.5 Starting the SLS Project Designer
* Although actual product may differ from the illustrations and figures in this document as they are used for
explanatory purpose only, same operation can be performed.
a) Supply the Power to the sensor. Connect USB cable of the sensor to the computer.
b) Click “ Start Menu” → “All Programs” → and click “SLS Project Designer”.
c) “SLS Project Designer” application will be activated.