IDEC SE2L-H05LPC, Руководство пользователя

Страница: 122 / 152

SE2L User’s Manual (SE9Z-B1865)
121
7.22 Save settings to SD card
Configuration data can be saved in the SD card which in turn can be used for directly configuring the
SE2L without connecting it to the PC.
＜
Steps to save
＞
a) Configure a project in the SLS Project Designer and click confirm button when it is complete.
b) In the confirmation tab, check the general, function and area settings in order.
c) Disconnect SE2L if it is connected with the application
d) Click the “Save to SD card” button to switch to the SD card setting tab.
e) In the SD card setting tab (Figure 7-58), enter the 7 digit serial number and the passwords of all the SE2Ls
intended to be configured with the settings on the SD card. To prevent the change of IP address of the
SE2L, check the “Exclude IP address setting” on the tab. This will retain the original IP address of all the
SE2L.
f) Verify that SD card is inserted into the PC slot and click “Save” button. Save dialog box as shown in
Figure 7-59 will appear.
g) Select the SD card and click on the “Select Folder” button.
h) Dialog box will close when saving is complete.
i) Remove the SD card from its slot.
Figure 7-58 SD Card setting screen