IDEC SE2L-H05LPC, Руководство пользователя

Страница: 107 / 152

SE2L User’s Manual (SE9Z-B1865)
106
7.12.2 Reclaim the forgotten password
When the password is forgotten, follow the steps below to reclaim the password.
a) Click the File of the menu bar.
b) Click the Save As or press Ctrl + S and save the project at a preferred location. Project will be saved in the
file [*****.hucx].
c) Send this file [****.hucx] file to the nearest office or representative listed on this manual to reclaim the
forgotten password.
7.13 Configuration mode
Click on the configuration tab to configure the setting of SE2L. The configuration of SE2L is password
protected to prevent the unauthorized access. User is required to log-in with the password to proceed with
the configuration. Refer to chapter 7.12 for details on password. Follow the steps below for configuration.
a) Confirm that SE2L and PC is connected (refer to section 7.11). Connect it if it is not. Even if
SE2L is not connected, user can configure the settings but cannot the transfer them to SE2L.
b) Click the “Configuration” tab or on the menu click “Mode” and select “Configuration”
c) Enter the product identity and user name in the General configuration tab, Enter the value in the Ethernet
information to change the IP setting. This information is also shown on SLS Project Designer’s report. Refer
to chapter 7.9.3 for details on report display.
Figure 7-37 General
 OSSD remains in OFF state when SE2L is in configuration mode