IDEC SE2L-H05LPC, Руководство пользователя

Страница: 46 / 152

SE2L User’s Manual (SE9Z-B1865)
45
 Perform the risk assessment before using the master-slave function.
 User should comply with all the following conditions when using the master-slave
function.
1. There should be one device configured as master in the system.
2. Number of slave units connected in the system should not exceed the slave cont
configured in the master unit.
3. Configuration of slave identity number should be in the order starting from 1 without
being overlapped.
4. Verify that each device is mounted at their intended location.
5. Verify that each device matches the intended configuration.
 Interlock function is mandatory when using the master-slave function for safety
operation.
 Connecting RS-485 lines to devices other than SE2L, such as actuators, is not
possible.
 Failing to comply with the above could lead to critical injury or death.

Configured active area count in master and slave units should be the same except
when using the encoder input function.

Scanning area operation mode in master and slave units should be the
same.