-
Calling and Talking (Calling)
-
Calling and Ringing
-
Talking and Ringing
-
Ringing and Talking (Called)
-
Calling, Talking and Ringing
Ring
The Ring settings allow you to configure the tone to be played by the intercom.
⦁
Alarm Ring Duration
: Specifies the time (in seconds) the tone rings when triggered.
⦁
The following triggers can activate the tone:
-
Input Trigger
-
Remote DTMF Trigger
-
Active URI Trigger
-
Remote SMS Trigger
⦁
When set to
Default
the tone is activated by the trigger for the defined ring duration.
⦁
When
Disabled
the tone will not be activated by the trigger.
Tamper Alarm Settings
⦁
Tamper Alarm
: Select to enable the tamper alarm.
⦁
Alarm Command
: Message sent as a SIP message when a tamper alarm is triggered.
⦁
Reset Command
: Message which should be received from the server to reset the tamper alarm.
⦁
Reset Alerting Status
: Stop the alarm immediately.
⦁
Ring Type
: When set to
Default
the alarm is activated for the defined ring duration when the tamper alarm
is triggered. When
Disabled
the alarm will not be activated by the tamper alarm.
Server Settings
⦁
Server Address
: The IP or Domain of the server to send SIP messages to when the input or tamper alarm is
triggered.
⦁
Message
: The message to be sent when the input or tamper alarm is triggered.
PRT-IPIC-POE-C | Vandal Resistant VoIP Intercom with Camera | Installation Manual
39
