Do not use the
Preview
button as this does not provide a camera feed in the web interface and may cause your
display to freeze momentarily.
Intercom Settings | MCAST
This feature is not supported.
Intercom Settings | Action URL
This feature is not supported.
Intercom Settings | Time/Date
There are two methods for setting the time and date on the intercom.
⦁
Simple Network Time Protocol (SNTP)
⦁
Manual Time
Network Time Server Settings (SNTP)
⦁
Time Synchronized via SNTP
: Select to enable time-sync via SNTP protocol.
⦁
Time Synchronized via DHCP
: This feature is not supported.
⦁
Primary Time Server
: Set the address of the primary time server.
⦁
Secondary Time Server
: Set the address of the secondary time server.
⦁
Select the appropriate
Time Zone
.
⦁
Set the
Resync Period
(in seconds) for the device to resynchronize time with the server.
60 seconds is the recommended setting.
Daylight Saving Time Settings
Select the
Location
and
DST Set Type
for Daylight Savings behavior.
Manual Time Settings
Before setting the time manually the SNTP and DHCP options need to be disabled.
To manually set the time, select the Year, Month, Date, Hour and Minutes, then click
Apply
.
Intercom Settings | Time Plan
This feature is not supported.
Intercom Settings | Trusted Certificates
This feature is not supported.
Intercom Settings | Device Certificates
This feature is not supported.
LED
This feature is not supported.
PRT-IPIC-POE-C | Vandal Resistant VoIP Intercom with Camera | Installation Manual
37
