Line
Line | SIP
The SIP
Line
settings enable SIP account configuration. Select the SIP line to be configured.
Note: the settings on this page always apply to the specific SIP line selected. A number of the intercom's
features can also be configured in
Intercom Settings
(see page 34), and are applied across all lines.
Line Status
: Displays the current status of the selected line. If the SIP account is successfully registered, active
and able to send and receive calls, the word
Registered
will be displayed.
If the line is not currently active one of the below errors will be displayed.
Error Code/Message
Description
Inactive
The line is not yet activated. The
Activate
option must be selected
401
Unauthorized (authentication failed). Check the authentication name and password
403 Forbidden
SIP server rejected registration. Check the authentication name and password
Timeout
No response from SIP server. Check network or SIP settings (likely incorrect IP)
Basic Settings
⦁
Phone Number
: SIP account login ID.
⦁
Display Name
: The name suggested to the SIP server for caller ID.
⦁
Authentication Name
: The authentication ID of the account.
⦁
Authentication Password
: SIP registration password.
⦁
Activate
:
This option must be selected to activate the line
.
⦁
SIP Proxy Server Address
: Proxy server IP or URL (usually the same as the SIP Registrar Server).
⦁
SIP Proxy Server Port
: Proxy server port. Usually 5060.
⦁
Backup Proxy Server Address
: This server will be used if the primary server is unavailable.
⦁
Backup Proxy Server Port
: The backup SIP Server port.
⦁
Outbound Proxy Address
: The outbound proxy server address provided by the service provider.
⦁
Outbound Proxy Port
: Usually 5060.
⦁
Realm
: SIP domain if different to the SIP Proxy Server Address.
Codecs Settings
Codecs can be
Enabled
and
Disabled
by selecting and moving them to the appropriate list, and priority can be
set by altering the list order.
Advanced Settings
Note: the settings on this page always apply to the specific SIP line selected. Some intercom features such as
DND can also be configured in
Intercom Settings
(see page 34) to be applied across all lines.
⦁
Enable DND
: Enable
Do Not Disturb
to block incoming calls to the selected line.
⦁
Blocking Anonymous Call
: Blocks any incoming call without a recognized caller ID.
⦁
Use 182 Response for Call waiting
: Set the 182 response for call waiting.
⦁
Anonymous Call Standard
: Selectable settings for SIP privacy protocol standards.
PRT-IPIC-POE-C | Vandal Resistant VoIP Intercom with Camera | Installation Manual
30
