Function Key
The Function Key menu enables configuration of the call button function settings.
Function Key Settings
⦁
Type
: The Key Type can be set to
Hot Key
or
None
.
-
When set to
None
the call button is
Disabled
. The intercom will only be able to receive calls.
-
When set to
Hot Key
the call button will dial the configured phone number or IP address.
-
Key Event
: This feature is not supported.
-
Multicast
: This feature is not supported.
-
PTT
: This feature is not supported.
⦁
Number 1
: The primary number or IP address to be called.
⦁
Number 2
: The secondary number or IP address to be called.
This can be utilized for main/secondary calling or day/night operation.
⦁
Select the SIP
Line
where required for Hot Key functionality.
⦁
Subtype
: The key subtype defines the action.
-
When set to
Speed Dial
pressing the key calls the configured number.
-
When set to
Intercom
pressing the key makes an IP call to the configured IP phone address.
Advanced Settings
⦁
Use Function Key to Answer
: When enabled the call button can be used to answer a call.
⦁
Enable Speed Dial Hangup
: When enabled the call button can be used to end a call.
⦁
Hot Key Dial Mode Select
:
-
When set to
Main-Secondary
Number 2
will be called when the first number is not answered.
◾
The
Call Switched Time
defines the delay (in seconds) before switching to the secondary number.
-
When set to
Day-Night
Number 2
will be called when the call button is pressed during night hours.
◾
Night hours are defined by the period outside the
Day Start Time
to
Day End Time
.
⦁
Speed Dial Time
: This feature is not supported.
Main/Secondary Operation
The intercom can be programmed to call a secondary number if the main number is not answered.
Function Key Settings
1.
From the
Type
list select
Hot Key
.
2.
In the
Number 1
field, enter the first number or IP address to call when the call button is pressed.
3.
In the
Number 2
field, enter the number or IP address to call when the first number is not answered.
4.
Select the corresponding
Line
(
Line 1 or Line 2
) for the SIP account.
5.
From the
Subtype
list select
Speed Dial
.
Advanced Settings
1.
Hot Key Dial Mode Select
: set to
Main-Secondary
.
2.
Click
Apply
.
Day/Night Operation
The intercom can be programmed to call a day number or night number, according to the call time settings.
PRT-IPIC-POE-C | Vandal Resistant VoIP Intercom with Camera | Installation Manual
40
