Unpacking the Intercom
1.
Using the
L-shaped hex tool
, remove the 6 screws and carefully remove the
front panel
.
2.
Using the
Phillips screwdriver
, remove the 6 main screws to detach the
rain shade
and
intercom
.
Preparation
Prepare the installation area:
1.
The recess cavity should be
235*135*48mm
2.
Place the
back panel
in the cavity where the
intercom
will be located and mark the 4 screw holes
3.
Drill 4 screw anchor holes as marked. A drill hole depth of 60mm is recommended
4.
Insert the screw anchors into the holes
PRT-IPIC-POE-C | Vandal Resistant VoIP Intercom with Camera | Installation Manual
15
