National Instruments PCIe-784 R Series, Начало работы

Страница: 1 / 14

Getting Started with R Series Multifunction RIO
This document explains how to install and configure National Instruments PCI/PXI-781 x R,
PCI/PXI-783 x R, PCIe/PXI-784 x R, and PCIe/PXI-785 x R, referred to collectively as NI 78 xx R devices.
This document also contains a tutorial section that demonstrates how to begin taking a measurement
using a LabVIEW FPGA example VI.
Figure 1. PCI, PCI Express, and PXI R Series Devices
NI 78 xx R Required Components
The following items are necessary to set up and use the NI 78 xx R:
❑
The following software packages:
– LabVIEW
– LabVIEW FPGA Module
– NI-RIO device drivers
– (Optional) LabVIEW Real-Time Module
Refer to Step 1. Install Application Software and Driver , for information on R Series software
support.
❑
Development computer or PXI/CompactPCI chassis and PXI/CompactPCI embedded controller
running Windows Vista/XP/2000.
❑
At least one cable and accessory for connecting signals to the NI 78 xx R. For a list of applicable
cable and accessory options, refer to the Connectivity Options section.