Icom IC-9700 Скачать руководство пользователя страница 71

Страница: 71 / 173

8-24

8. GPS OPERATION (ADVANCED)

GPS Memory

Deleting GPS Memory

You can delete the GPS Memories.

There are 2 ways to delete the Memories:

• Deletes all GPS Memory in a group.

•

Deletes a specific GPS Memory.

NOTE:

Deleted GPS Memories cannot be restored.

Example:

Deleting all in the Group E.

1. Open the GPS MEMORY screen.

MENU

» GPS >

GPS Memory

2. Touch the group where the GPS Memory to

delete is saved for 1 second.

3. Touch “Delete All In Group.”

4. Touch [YES].

• All GPS Memory in the selected group are deleted,

then returns to the GPS MEMORY screen.

When selecting a blank group, “Blank” is displayed.

5. To close the GPS MEMORY screen, push

EXIT

several times.

TIP: Deleting a specific GPS Memory

You can delete a specific GPS Memory.

1. Touch the GPS Memory to delete.

2. Touch “Delete.”

3. Touch [YES].

• The selected GPS Memory is deleted.

Содержание IC-9700














































































































































































Результаты поиска

Содержание IC-9700

Отзывы:

Похожие инструкции для IC-9700

Бренды по названию

Популярные бренды

Icom IC-9700, Руководство для продвинутых пользователей

Результаты поиска

Содержание IC-9700

Отзывы:

Похожие инструкции для IC-9700

Бренды по названию

Популярные бренды