Icom IC-9700 Скачать руководство пользователя страница 29

Страница: 29 / 173

4. MEMORY OPERATION

4-1

Memory channels

Selecting a Memory channel

The Memory mode enables you to quickly select

often-used frequencies, modes and other parameters.

You can change the operating frequency, mode and

so on while operating in the Memory mode.

You can temporarily tune the memory channel frequency

by rotating

MAIN DIAL

Memory

channel

Displayed

1 to 99

Regular memory channels.

1 frequency, 1 mode, 1 filter, memory name,

tone settings (including tone frequencies

for repeater and tone squelch) and select

memory scan setting in each memory

channel.

1A/1B ~

3A/3B

Scan Edge memory channels.

1 frequency and 1 mode in each memory

channel as scan edges for programmed

scans.

C1/C2

Call channels.

Cannot be left blank.

Selecting with

MULTI

1. Push

V/M

to select the Memory mode.

2. Rotate

MULTI

until you select the Memory

channel you want to use.

You can also select the memory channel with

[UP] and [DOWN] keys on the microphone.

Memory mode

(Example: Memory channel 1)

Selecting a channel on the MEMORY screen

1. Push

V/M

to select the Memory mode.

2. Display the MEMORY screen.

3. Rotate

MULTI

MAIN DIAL

, or touch [UP] or

[DOWN] until the desired Memory channel is

shown on the screen.

4. Touch the Memory channel you want to use.

• The channel is selected and automatically closes the

MEMORY screen.

Selecting using the keypad

1. Push

V/M

to select the Memory mode.

2. Touch the MHz digit on the operating frequency.

•The BAND STACKING REGISTER screen is displayed.

3. Touch [F-INP].

•The F-INP screen is displayed.

4. Enter the desired memory channel number.

(Example: memory channel 2)

5. Touch [MEMO] to set the entered memory

channel.

Memory channel 2 is selected

Selecting a Call channel

1. Push

CALL

to select the Call channel mode.

2. Rotate

MULTI

to select the Call channel you

want to use.

3. To return to the previous screen, push

CALL

MENU

MEMORY

Содержание IC-9700














































































































































































Результаты поиска

Содержание IC-9700

Отзывы:

Похожие инструкции для IC-9700

Бренды по названию

Популярные бренды

Icom IC-9700, Руководство для продвинутых пользователей

Результаты поиска

Содержание IC-9700

Отзывы:

Похожие инструкции для IC-9700

Бренды по названию

Популярные бренды