Icom IC-9700 Скачать руководство пользователя

Страница: 70 / 173

8-23

8. GPS OPERATION (ADVANCED)

GPS Memory

Adding a GPS Memory

9. Writing the GPS Memory

1. Touch “<<Add Write>>.”

If you edit a previously added GPS Memory, touch

“<<Overwrite>>.”

2. Touch [YES].

• The data is added to the GPS memory, and then the

selected GPS Memory group screen is displayed.

3. To close the GPS Memory group screen, push

EXIT

several times.

TIP:

To view the entered content:

Touch the GPS Memory channel. Rotate

MAIN DIAL

to check the whole content.

To cancel the entered data:

While entering or editing the GPS Memory, push

EXIT

to display the confirmation dialog.

Touch [YES] to cancel entering and the display

returns to the GPS Memory group screen.

Entering the GPS Memory group name

You can enter a name for each GPS Memory group.

1. Open the GPS MEMORY screen.

MENU

» GPS >

GPS Memory

2. Touch the group that the name to be entered for

1 second.

3. Touch “Edit Name.”

4. Enter a group name of up to 16 characters.

5. After entering, touch [ENT].

6. To close the GPS MEMORY screen, push

EXIT

several times.

Содержание IC-9700














































































































































































Результаты поиска

Содержание IC-9700

Отзывы:

Похожие инструкции для IC-9700

Бренды по названию

Популярные бренды

Icom IC-9700, Руководство для продвинутых пользователей

Результаты поиска

Содержание IC-9700

Отзывы:

Похожие инструкции для IC-9700

Бренды по названию

Популярные бренды