Icom IC-9700 Скачать руководство пользователя страница 105

Страница: 105 / 173

10-3

10. D-STAR OPERATION (ADVANCED)

“FROM” (Access repeater) setting

Using the DR scan

The DR scan scans frequencies to find a signal on a

repeater, or on a simplex frequency.

You can use 2 kinds of DR scans, Normal scan and

Near Repeater scan.

Normal scan

To quickly find a repeater, the Normal scan skips

repeaters that are not set as an access repeater.

The “USE (FROM)” setting is set to “NO” on the

repeater list.

(MENU > DV Memory >

Repeater List

)

Near Repeater scan

The Near Repeater scan searches for up to 20 nearby

repeaters by using your position and the repeater’s

entered position, and then lists the repeaters.

The Near Repeater scan continues, even if you

turn OFF the transceiver, and then turn it ON again

during the scan.

If your own position data is not being received from

GPS satellites, the last received position is used.

Example:

Selecting an active repeater using the DR

scan.

1. Select the operating band. (Example: 430 MHz)

2. Hold down

CALL

for 1 second to display the DR

screen.

3. Touch [FROM] to select “FROM.”

4. Push

SCAN

•Displays the DR scan setting window.

5. Rotate [DIAL] to select the scan type.

• Normal:

Searches for repeaters whose “USE (FROM)”

setting is set to “YES.”

• Near Repeater (DV/FM):

Searches for up to 20 nearby DV or FM

repeaters. (Total 40 repeaters)

• Near Repeater (DV):

Searches for up to 20 nearby DV repeaters.

• Near Repeater (FM):

Searches for up to 20 nearby FM repeaters.

•The selected scan starts.

• In the DR scan, the repeaters are sequentially

displayed by distance, in descending order.

The scan resumes the same as other scans.

Blinks

← The repeaters

are sequentially

displayed.

6. When the transceiver receives a signal from a

repeater, the scan stops. Push

SCAN

• The DR scan is canceled, and the repeater is set to

“FROM.”

NOTE:

Even if your transceiver receives a repeater

signal, the repeater may not receive your signal,

because the repeater’s output power is higher than

your transceiver’s, and your signal does not reach

the repeater.

TIP:

The DR scan scans the simplex frequencies in

the repeater list, in addition to D-STAR repeaters.

Содержание IC-9700














































































































































































Результаты поиска

Содержание IC-9700

Отзывы:

Похожие инструкции для IC-9700

Бренды по названию

Популярные бренды

Icom IC-9700, Руководство для продвинутых пользователей

Результаты поиска

Содержание IC-9700

Отзывы:

Похожие инструкции для IC-9700

Бренды по названию

Популярные бренды