Icom IC-9700 Скачать руководство пользователя страница 36

Страница: 36 / 173

5-3

5. SCANS

Pause Timer

(Default: 10sec)

When Scan Resume is ON, select the Scan Pause

Timer. When receiving a signal, the scan pauses for

this set period of time.

•2 ~ 20sec:

When a signal is received, the scan

pauses for 2 ~ 20 seconds (in 2

second steps).

•HOLD:

The scan pauses on a received

signal until the signal disappears.

Resume Timer

(Default: 2sec)

Select the scan Resume Timer. When a received

signal disappears, the scan resumes after this set

period of time passed.

•0sec:

The scan resumes immediately after the

signal disappears.

•1 ~ 5sec: The scan resumes 1 ~ 5 seconds after the

signal disappears.

•HOLD: The scan remains paused for the

Pause Timer setting, even if the signal

disappears.

Temporary Skip Timer

(Default: 5min)

Set the Temporary Skip Timer. The unwanted

frequencies that are set as Skip channels (PSKIP or

SKIP) are skipped for this set period of time during a

scan.

This timer is activated for the VFO scan, Memory scan,

and DR scan.

•5min/10min/15min:

Skip channels are skipped

for the set period of time.

•While Scanning:

Skip channels are skipped

until the Scan is stopped.

•While Powered ON: Skip channels are skipped

until the receiver power is

turned OFF.

SCAN SET screen

1. Display the SCAN screen.

MENU

SCAN

2. Touch [SET].

3. Touch an item to set. (Example: SCAN Speed)

4. Touch an option. (Example: Slow)

5. To close the SCAN SET screen, push

EXIT

TIP: How to reset to the default settings

Touching an item or its option for 1 second displays

the Quick menu, and then touch “Default” to reset

to the default setting.

SCAN Speed

(Default: Fast)

Set the desired scan speed to slow or fast.

•Slow: Scan speed is slow.

•Fast: Scan speed is fast.

SCAN Resume

(Default: ON)

Set the Scan Resume function to ON or OFF.

•OFF: When a signal is detected, cancels the scan.

•ON: When a signal is detected, the scan pauses

for 10 seconds, then resumes.

Two seconds after the signal disappears, the

scan resumes.

Содержание IC-9700














































































































































































Результаты поиска

Содержание IC-9700

Отзывы:

Похожие инструкции для IC-9700

Бренды по названию

Популярные бренды

Icom IC-9700, Руководство для продвинутых пользователей

Результаты поиска

Содержание IC-9700

Отзывы:

Похожие инструкции для IC-9700

Бренды по названию

Популярные бренды