7
INFORMATION
Form2001
7-4
2. Connecting using Telnet
This topic explains how to connect using Telnet.
M
For Windows 7
To use Telnet, access [Control Panel], [Programs], [Turn Windows features on or off] and enable [Telnet cli-
ent], and then follow the steps below.
How to set
1. Start up Windows.
2. Click the [Start] button, and then select [Search programs and files].
Type-in “telnet.exe” and push [Enter].
3. When the telnet screen appears, enter as follows.
Microsoft Telnet> “open” and IP address. (Example: open 192.168.0.1)
4. Enter as follows, and then push [Enter] to log in.
login
:
admin
password
:
admin
• “admin” is set as default.
• Enter the administrator’s password set on the setting screen.
5. If Telnet can access the AP-90M, “AP-90M #” is displayed on the Telnet screen.
M
About the Telnet commands
The following commands can be used for the Telnet function.
Command list
:
Push the [Tab] key to display the telnet command list.
After typing a telnet command, push the [Tab] key to display the sub command
list.
Command help
:
After typing “help,” enter a command to display the command description.
(Example) “help save” (“save” command description is displayed.)
Automatic complement
: After typing first few characters of the command, push the [Tab] key. The rest of
the characters for the command are automatically entered.
(Example) “n” + [Tab] -> network
Suggested commands are displayed.
(Example) “res” + [Tab] ->
res
et
res
tart
