1
BEFORE USING THE AP-90M
1-12
WPS function
With the function that the “Wi-Fi Alliance” proposed, SSID and Security (WPA-PSK/WPA2-PSK) can automati-
cally be set to the AP-90M and the wireless LAN station that supports the WPS (Wi-Fi Protected Setup) function.
• To automatically set it and start the WPS function, you can select either of the following methods.
Using the [WPS] button (
➥
+
p.1-3) that is located on the back of the AP-90M.
(Push Button)
Setting the communicator’s PIN code.
➥
(PIN (Personal Identification Number))
• See Section 2 (
+
p.2-11) for examples on setting the SSID and Shared Key to the wireless LAN station
using the WPS function.
• See Section 3 (
+
p.3-8) for an example on automatically setting with the WPS function.
Using the WPS function
Use a wireless LAN station that supports the WPS function.
➥
If your wireless LAN station has no [WPS] button, use the application that supports WPS, or a regular
➥
wireless network connection using Windows (Windows 7 or later).
Enable the virtual AP and select the “Interface (ath0 to ath7)” to automatically set the virtual AP using the
➥
WPS function. (
+
p.2-11)
If you select an invalid virtual AP for “Interface,” the [WPS] button cannot be used. (
+
p.1-3)
2. Main functions (Continued)
q
Push [WPS]
Wireless LAN station
DC
GND
LAN
USB
WPS
w
Push [WPS]
Using the WPS function
Wireless
LAN station
q
Connect the cabled LAN station.
w
Access the setting screen.
e
Set the SSID and Shared Key.
r
Start the connection software.
t
Select the “SSID” of the virtual AP.
y
Select the encryption.
Not using the WPS function
AP-90M
AP-90M
