manualshive.com logo in svg

Icom AP-90M, Инструкция по эксплуатации

Поделиться
Скачать
Icom AP-90M Скачать руководство пользователя страница 79

6

MAINTENANCE

6-5

Management > Factory Defaults

If you can access the setting screen with the IP address and the administrator’s password, you can restore 
all the default settings from the setting screen.
If the IP address and the password are unknown, see page 6-4.

B

 Using the setting screen

Click [Management], and then click [Factory Defaults].

• The “Factory Defaults” screen is displayed.

1

Select the restore button, and then click [Restore]. (Default: Restore All Settings)

2

Click [OK].

• The AP-90M restarts to restore the default settings.

3

After the restart is complete, click [Back].

4

Click

q

 Select

w

 Click

NOTE about “Factory Defaults”:

Restore All Settings

 

➥

  Restores all the set values to their defaults, including the IP address. (http://192.168.0.1/)
  If you cannot access the AP-90M, change the PC’s IP address.

Restore Wireless Settings

 

➥

  Restores only the settings set on the “Wireless Settings” screen to their default values.
  After the restoring is complete, “SSID” is set to “WIRELESSLAN-0,” and “Encryption” is set to “None.”
   If the SSID or encryption set by restoring the factory defaults differ from those set in the AP-90M, you 

will not be able to access the setting screen. In such a case, change the settings in the “Wireless Set-
tings” menu and the wireless LAN station settings.

3. Restoring the factory defaults (Continued)

Содержание AP-90M








































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды