icetro IC-0170A, Руководство техника

Страница: 29 / 166

Step 5
Mix a solution of cleaner and warm water.
Depending on the amount of mineral buildup, a larger
quantity of solution may be required. Use the ratio in
the table below to mix enough solution to thoroughly
descale all parts.
Solution Type Water Mixed with
Cleaner 1 gal. (4 l) 16 oz (500 ml)
cleaner
,
Caution
Do not immerse electrical connectors or motors
for any components in water, cleaner, or sanitizer
solutions.
Use half of the cleaner and water solution to descale all
components. The solution will foam when it contacts lime
scale and mineral deposits; once the foaming stops use a
soft bristle brush, sponge or cloth (not a wire brush) to
carefully descale the parts. Soak the parts for 5 minutes
(15 – 20 minutes for heavily scaled parts). Rinse all
components with clean water.
Step 6
While components are soaking, use half of the
cleaner and water solution to descale all foodzone
surfaces of the ice machine and bin. Use a nylon brush or
cloth to thoroughly descale the following ice machine
areas:
• Evaporator plastic parts – including top, bottom and
sides
• Bin bottom, sides and top
• Rinse all areas thoroughly with clean water.
2 8