ICC ETH-1000, Инструкция по эксплуатации

Страница: 204 / 281

203
ICC
11.3.3 BACnet/IP and BACnet MS/TP Server
11.3.3.1 Overview
The gateway supports BACnet IP server on its Ethernet port and BACnet MS/TP
server on its RS-485 port. Some notes of interest are:
•
Fully configurable BACnet objects.
•
Supported BACnet objects include:
o
Analog Input
o
Analog Output
o
Analog Value
o
Binary Input
o
Binary Output
o
Binary Value
•
Supported MS/TP baud rates include:
o
4800
o
9600
o
19200
o
38400
o
57600
o
76800
o
115200
•
The gateway supports the BACnet/IP (Annex J) protocol over Ethernet via
UDP port 47808.
•
Binary Objects support custom Active and Inactive Text.
•
BACnet/IP supports COVs.
11.3.3.2 BACnet Objects
The BACnet server hosts BACnet objects which contain many different properties
for any BACnet client on the network to access. The gateway supports seven
different BACnet objects: Device, Analog Input, Analog Output, Analog Value,
Binary Input, Binary Output, and Binary Value. All supported properties of these
objects are readable, while only the present value property is writable (for
Outputs and Values only). Refer to section 11.3.1 for the list of properties each
object supports. The objects and their properties are configured using the
configuration utility (or, optionally, via the web interface for BACnet IP). Refer to
sections 8.7.2 and 8.8.3.3 for more information on configuring BACnet objects.
11.3.3.3 Supported BACnet Services
This section details the BACnet services that are supported:
Read Property
This service is used to request data from the gateway about one of its BACnet
object’s properties.