ICC ETH-1000, Инструкция по эксплуатации

Страница: 189 / 281

188
ICC
for this alarm unless the alarm condition is first evaluated as “false” (which resets
the alarm), and then once again is triggered by a subsequent event.
If this check box is checked, then as long as the alarm condition continues to be
evaluated as “true”, subsequent email transmissions will be automatically
retriggered every indicated number of minutes for a maximum of the indicated
number of times. If at any time during the subsequent transmissions the alarm
condition is evaluated as “false”, then the alarm will be reset and email
transmissions for this alarm will stop (until the next time the alarm is triggered, of
course).
Subject: Enter a string of up to 128 characters in length which will appear in the
“subject” line of the alarm email. The body of the alarm email is empty.
10.17.3 Submitting Changes
Whenever any of the Alarm configuration elements have been changed, the
“submit” button must be clicked in order to write these settings to the gateway’s
filesystem.
Note that because these configuration elements are read from the filesystem only
when the gateway boots up, the act of submitting configuration changes will also
reset the gateway. Please allow 20 seconds for the gateway to reboot, at which
time it will then be operating with the recently-submitted configuration.