ICC ETH-1000, Инструкция по эксплуатации, Страница: 117 / 281

116
ICC
•
Click Create .
o
Since the output voltage has a different multiplier than the other two
analog inputs, it must be defined as a separate service object.
•
Select Analog Input from the Type selection group.
•
Enter the address of the drive into the Dest Address field.
•
Enter “3” into the Start Inst field.
•
Enter “1” into the Num Insts field.
•
Enter “8” into the Database Addr field.
•
Select 32-bit Unsigned from the Data Type dropdown
menu.
•
Enter “0.1” into the Multiplier field.
•
Click Create .
o
Now we must create a service object to monitor the running,
forward/stop, and reverse/stop bits.
•
Select Binary Input from the Type selection group.
•
Enter the address of the drive into the Dest Address field.
•
Enter “1” into the Start Inst field.
•
Enter “3” into the Num Insts field.
•
Enter “12” into the Database Addr field.
•
Click Create .
o
To command the frequency command, we must create a service
object for that analog output.
•
Select Analog Output from the Type selection group.
•
Enter the address of the drive into the Dest Address field.
•
Enter “2” into the Start Inst field.
•
Enter “1” into the Num Insts field.
•
Enter “16” into the Database Addr field.
•
Select 32-bit Unsigned from the Data Type dropdown
menu.
•
Enter “0.01” into the Multiplier field.
•
Click Create .
o
To command the forward/stop and reverse/stop command bits, one
last service object must be created.
•
Select Binary Output from the Type selection group.
•
Enter the address of the drive into the Dest Address field.
•
Enter “2” into the Start Inst field.
•
Enter “2” into the Num Insts field.
•
Enter “20” into the Database Addr field.
•
Click Create .
Finishing Up
•
Download the configuration to the gateway (see section 8.1 for more
information on downloading a configuration to a device).
•
Connect to the gateway with your PLC.