IBM System x3690 X5, Руководство по обслуживанию, Страница: 414 / 464

Note: When you replace the system-board tray in the MAX5, be sure to order
the correct system-board tray for your model. A label comes on models of the
MAX5 that contains the Intel 7510 scalable memory buffer. The label in located
on top of the system-board tray. A note on the label states “This MAX5 contains
Intel 7510 scalable memory buffer”. In addition, models of the MAX5 that
contains the Intel 7510 scalable memory buffer will have a label attached inside
of the MAX5 chassis. To locate the label, remove the front bezel. The label is
attached to the left side of the chassis with the text “7510 SMB”. See the parts
listing table in “Replaceable MAX5 components” on page 255 for more
information about the correct system-board tray for your model.
5. Slide the system-board tray forward until the tabs at the bottom of the handles
touch the chassis; then, close the handles and press firmly on the release latches
to snap them into the locked position.
6.
Reinstall the bezel (see “Replacing the MAX5 bezel” on page 376).
7. Reconnect the power cords to the MAX5; then, connect all external cables to the
MAX5
8. Turn on the peripheral devices and the host server.
396
System x3690 X5 Types 7147, 7148, 7149, and 7192: Problem Determination and Service Guide