IBM System x3690 X5, Руководство по обслуживанию, Страница: 405 / 464

Table 27. Memory-mirroring mode DIMM population sequence for the MAX5 memory
expansion module (continued)
Sets of 4 DIMMs DIMM connector population sequence
Set 4 3, 6, 18, 23
Set 5 10, 15, 27, 30
Set 6 2, 7, 19, 22
Set 7 12, 13, 25, 32
Set 8 4, 5, 17, 24
Note: When you populate DIMMs in the MAX5, populate the larger capacity
DIMMs first; then the smaller capacity DIMMs.
The following illustration shows the location of the DIMMs connectors on the
system-board tray:
To install a memory module in the MAX5 expansion module, complete the
following steps.
Note:
The MAX5 might come with DIMM fillers on DIMM connectors that are not
populated. Remove them before you install DIMMs in those connectors.
Chapter 5. Removing and replacing components
387