IBM SAN768B-2, Руководство пользователя

Страница: 176 / 228

Table 22. System sizes and weights (continued)
Empty chassis:
v
No blades
v
No CPs
v
No CRs
v
No power supplies
v
No fan assemblies
37.3 kg (82.2 lb)
Table 23 lists the weights of the compatible blades and FRUs
Table 23. System FRU weights
FRU Weight
CP blade (CP8) 3.0 kg (6.6 lb)
CR blade (CR16-8) 3.7 kg (8.1 lb)
FC8-32E port blade 2.8 kg (6.2 lb) without media
FC8-48E port blade 3.3 kg (7.3 lb) without media
FC8-64 port blade 3.36 kg (7.4 lb) without media
FC16-32 port blade 2.8 kg (6.2 lb) without media
FC16-48 port blade 3.3 kg (7.3 lb) without media
FC16-64 port blade 3.56 kg (7.85 lb) without media
FCOE10-24 FCoE blade 3.72 kg (8.2 lb) without media
FS8-18 encryption blade 5.5 kg (12.0 lb) without media
FX8-24 extension blade 4.2 kg (9.2 lb) without media
Port card filler panel 1.5 kg (3.2 lb)
Power supply 2.45 kg (5.4 lb)
Blower assembly 5.73 kg (12.6 lb)
WWN bezel 0.3 kg (0.6 lb)
Cable management comb 0.45 kg (1.0 lb)
Chassis door 2.09 kg (4.6 lb.)
Facility requirements
The facility where the SAN768B-2 is in use must meet the following requirements
to provide for correct operation:
v
Adequate supply circuit, line fusing, and wire size, as specified by the electrical
rating on the chassis nameplate
v
An air flow of at least 595 cubic meters per hour (350 cubic feet per minute),
available in the immediate vicinity of the SAN768B-2
v The power specifications listed in Table 25 on page 150
v
The environmental specifications listed in Table 24 on page 149
v
If the SAN768B-2 will be installed in an EIA rack, ensure the equipment meets
following requirements:
– All equipment installed in the rack has a reliable branch circuit ground
connection, and does not rely on a connection to a branch circuit, such as a
power strip.
148
SAN768B-2 Installation, Service, and User Guide
||
||