IBM SAN768B-2, Руководство пользователя

Страница: 45 / 228

Table 3. Installation tasks, time, and items required
Installation task Time estimate Items required
Unpacking and assembling
the lift tool 15 minutes No special tools required.
Site preparation and
unpacking the SAN768B-2 30 minutes #2 Phillips screwdriver (for
cable management comb)
Pallet jack (if the shipment
has not been positioned near
the installation site)
Installing the rack mount kit 30 minutes Torque wrench with #2
Phillips screwdriver tip
Flathead screwdriver
Mounting and securing the
SAN768B-2 in the rack 30 minutes Torque wrench with #2
Phillips screwdriver tip Lift
tool and load plate
Installing power cables and
powering on the SAN768B-2 20 minutes Power cables
Establishing serial
connection, logging on to the
SAN768B-2, and configuring
IP addresses. 20 minutes Serial cable (provided in the
accessory kit). Workstation
computer with a serial port
or terminal server port and a
terminal emulator
application (such as
HyperTerminal). Ethernet IP
addresses for the chassis and
for both control processor
blades (total of 3 IP
addreses).
Installing an Ethernet cable,
opening a Telnet session, and
configuring the SAN768B-2
domain ID, date and time,
and additional system
parameters. Verifying and
backing up the configuration. 20 minutes Ethernet cable for Telnet
access. Refer to the
Fabric OS
Administrator’s Guide .
Installing transceivers as
needed 30 minutes (longer if using
high density port blades) SFP+, mSFP, and QSFP
optical transceivers as
needed.
Attaching fiber optic cables,
cable wraps, and cable
guides 2-3 hours Fiber optic cables and cable
wraps.
Disassembling and packing
the lift tool 20 minutes No special tools required.
Note: Assembly instructions for the lift tool are in the shipping container.
Tools required
You will require the following items to install the SAN768B-2 in the cabinet:
v
Torque wrench with #2 Phillips screwdriver tip
v
Flathead screwdriver
v
Lift tool
Chapter 2. Installing a SAN768B-2 in a cabinet
17