IBM SAN768B-2, Руководство пользователя

Страница: 161 / 228

Chapter 6. Installing new features
Attention: Refer to “Safety notices and labels” on page xiii before performing
any service or installation procedures.
The SAN768B-2 can be upgraded with any of the following hot-pluggable features
while the SAN768B-2 is operational. Refer to the individual feature installation
instructions for any possible exceptions.
Use this chapter as a starting point when installing new features on an existing
SAN768B-2. Installation instructions link from here to the appropriate sections.
v
“FC3632, FC3648, FC3664 - Installing a 16-Gb port blade (32, 48, or 64 ports)”
v
“FC3633, FC3649 - Installing an Enhanced 8-Gb port blade (32 or 48 ports)” on
page 135
v
“FC3864 - Installing an 8-Gb 64-port port blade” on page 136
v
“FC3890 - Installing an Extension Blade (FX8-24)” on page 140
v “FC3895 - Installing an Encryption Blade (FS8-18)” on page 141
v
“FC7230 - Installing FIPS 140-2 Level 2 tamper proof seals” on page 143
v “FC7871 - Installing a QSFP and inter-chassis license” on page 143
v
“FC7873 - Installing a QSFP and Enterprise inter-chassis license” on page 144
FC3632, FC3648, FC3664 - Installing a 16-Gb port blade (32, 48, or 64
ports)
These features can be installed while the SAN768B-2 is operational.
Attention: Follow these precautions for all procedures in this section to avoid
damaging the port blades or chassis:
v
Wear a grounded ESD strap when handling a port blade (see “ESD precautions”
on page xix).
v
Carefully remove the protective strip (if any) covering the blade connectors
before installing any blades.
v
Do not force the port blade installation. If the port blade does not slide in easily,
ensure that it is correctly aligned inside the rail guides before continuing.
Installing a port blade with incorrect alignment damages both the chassis and
the replacement part.
v
Hold the port blade by the edges of the metal pan. Do not use the ejectors to
hold a port blade.
v Disassembling any part of a port blade voids the part warranty and regulatory
certifications. There are no user-serviceable parts inside the port blade.
These instructions cover installing a new FC3632, FC3648, or FC3664 in the
SAN768B-2 chassis.
Time required
20 minutes or less per port blade.
© Copyright IBM Corp. 2011, 2014
133
|
|