IBM S822LC, Обслуживание

Страница: 104 / 146

a. Grasping the sides of the tool and system processor module, carefully lift it slightly out of the
system processor module tray. Then, turn it over so that the system processor module side is up.
b. Ensure that both jaws (A) are firmly grabbing the system processor module, as shown in
Figure 90.
Note: If both jaws are not firmly grabbing the system processor module, press down on the
corner of the system processor module closest to the jaw until it locks into place. Do not touch
any part of the system processor module other than the corners.
5. Install the system processor module:
a. If dust or debris is present on the system processor socket, use the supplied air pump (part
number 45D2645) to clean the socket. Blow small bursts of air from the center toward the sides of
the socket, as shown Figure 91 on page 89.
P8EDE525-1
A
Figure 90. Preparing for system processor module installation
88
Servicing the IBM Power System S822LC (8335-GCA or 8335-GTA)