IBM PC Server 704, Руководство пользователя

Страница: 68 / 332

SCSISelect Utility Program
Using the SCSISelect Utility Program
Note: For disk-array models, use the Configuration diskettes that
came with the RAID adapter to view or change SCSI settings
for attached devices.
The SCSI controllers have built-in menu-driven configuration utility
programs that allow you to view and change SCSI settings.
You can use the SCSISelect Utility programs to:
Ÿ
Change the default values
Ÿ Verify and change configuration conflicts
Ÿ Format a new SCSI hard disk
This section gives an overview of the SCSISelect Utility program.
Refer to the SCSI Software User's Guide for more information.
Starting the SCSISelect Utility Program
You can access this program when you start the server. During
system startup, the IBM PC Server screen appears briefly and then
disappears. The following prompt is displayed:
<<<
Press
<
CTRL
><
A
>
for SCSISelect

Utility! >>>
Press Ctrl
+
A when you see this prompt.
Use the Up Arrow (
↑
) or Down Arrow (
↓
) key to move the
highlight bar to the various menu choices. Press Esc to return to the
previous menu. Also, you can press F5 to switch between color and
monochrome modes (if your monitor permits). To change the
current settings of the items displayed in the menus, follow the
directions on the screen.
54
PC Server 704 User's Handbook