IBM PC Server 704, Руководство пользователя

Страница: 210 / 332

Installing the Top Cover
Completing the Installation
To complete your installation, you must reinstall the top and side
covers, and reconnect all the cables that you disconnected in
“Preparing to Install Options” on page 66. Follow the instructions
in this section.
Installing the Top Cover
Before you begin:
Be sure you have read “Electrical Safety” on page 63 and
“Handling Static-Sensitive Devices” on page 65 (or your safety
booklet).
12
Attention : Do not damage or displace the electromagnetic
interference (EMI) gaskets mounted on the cover. Replace
any damaged gaskets, or your server might not meet EMI
requirements.
To install the server top cover, do the following steps:
1. Before installing a cover, make sure that you have not left loose
tools or parts inside the server. Check that all cables, adapters,
and other components are installed and seated correctly.
2. Lower the cover with the front edge about one inch back from
the bezel edge. The leading corners of the cover should be
outside the chassis metal.
3. Pull the cover toward the back slightly to make sure that it is
aligned correctly.
Chapter 3. Installing Options
197