IBM PC Server 704, Руководство пользователя

Страница: 67 / 332

Configuration Conflicts
6. Remove the device or adapter. Some configurations are not
supported (for example, you cannot operate the server with two
ISA SVGA adapters installed). If you must remove an adapter,
see “Removing Adapters” on page 143.
Resolving Software Configuration Conflicts
The memory-address space and IRQs used by some hardware
options might conflict with addresses defined for use through
application programs.
If there is a conflict, one or more of the following conditions might
exist:
Ÿ
The system cannot load the operating system.
Ÿ The system does not work.
Ÿ An application program does not operate, or it returns an error.
Ÿ Screen messages indicate a conflict exists.
You can resolve conflicts by changing either the software or the
hardware configuration.
Note: Use the Change Configuration Settings selection in the
System Configuration Utility program to view the addresses
used by the system board functions and adapters. (See “Step
3: Change Configuration Settings” on page 39 for
instructions.)
Changing the Software Configuration
If a device driver is causing a memory-address conflict, refer to your
operating-system documentation or the documentation supplied
with the device drivers.
Chapter 2. Configuring Your Server
53