IBM PC Server 704, Руководство пользователя

Страница: 188 / 332

Removing Internal Drives
To remove a removable-media drive from the upper-left front bays,
do the following steps:
1. Identify the drive that you plan to remove.
2. Disconnect the signal and power cables from the back of the
drive.
3. Remove the filler panel frame:
a. Press the two filler panel frame release tabs, located between
the front edge of the cardcage and the metal flange (the tab
locations are pinpointed but not shown at
.1/
in the
following figure).
b. Swing the frame out to the right; then, remove it from the
chassis by disengaging the hinge tabs at the right edge of
the frame (at
.2/
in the following figure).
1
2
c. Place the filler panel frame face down on a soft surface to
prevent marring the front of the frame unit.
Chapter 3. Installing Options
175