IBM PC Server 704, Руководство пользователя

Страница: 198 / 332

Removing Internal Drives
a. Remove the four screws that hold the drive to the carrier.
Save the screws for later use.
b. Remove the carrier from on top of the drive.
c. Place the drive in a static-protective bag and store it in a
safe place.
Static
Devices
d. If you are installing another drive in the carrier, go to step 4
on page 168. Otherwise, continue with the next step.
9. Push the plastic lever to the right until it locks around the small
metal posts.
10. Close the EMI metal panel and secure it with the three
thumbscrews.
11. To restrict access to the bays, insert and lock a padlock through
the holes at the left edge of the EMI panel.
12. If your server has a RAID adapter installed, refer to the RAID
adapter documentation for details about configuration
requirements. Record the RAID configuration information in
the appropriate tables in “Installed Device Records” on
page 272.
13. If you are removing another hot-swap drive, return to step 1 on
page 184.
14. If you are installing another hot-swap drive assembly, slide the
drive assembly vertically into the target bay until the drive
connects to the backplane, and move the lever to the locked
position.
Chapter 3. Installing Options
185