IBM BladeCenter HT 8740, Руководство по диагностике и обслуживанию

Страница: 72 / 158

Installing a CompactFlash module
To install a CompactFlash card, complete the following steps.
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 31.
2. Pull out the media tray from the BladeCenter HT unit so that the CompactFlash
connectors are accessible (see “Removing a media tray” on page 51).
3. If you are replacing an existing CompactFlash module that is already installed,
remove it (see “Removing a CompactFlash module” on page 53).
4. Make sure the CompactFlash release buttons are pushed in.
5. Insert the CompactFlash module into the socket on the media tray.
Note: The sides of the CompactFlash card have a guide slot. Insert the
CompactFlash module with the narrow guide slot positioned towards the front of
the media tray.
6. Install the media tray into the BladeCenter HT unit (see “Installing a media tray”
on page 52).
7. See the documentation that comes with the CompactFlash card for configuration
information.
54
BladeCenter HT Type 8740 and 8750: Problem Determination and Service Guide