IBM BladeCenter HT 8740, Руководство по диагностике и обслуживанию

Страница: 92 / 158

Installing a management-module interposer
To install a management-module interposer or tray, complete the following steps.
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 31.
2. Remove the management module filler and management module tray filler (see
“Removing a management module” on page 75 and “Removing a
management-module interposer” on page 73).
3. Make sure that the management-module interposer release handle is in the
open position.
4. Slide the interposer into the management-module bay.
5. Push the release handle on the interposer to the closed position.
6. Install a management module or filler into the management-module bay (see
“Installing a management module” on page 76).
74
BladeCenter HT Type 8740 and 8750: Problem Determination and Service Guide