IBM BladeCenter HT 8740, Руководство по диагностике и обслуживанию

Страница: 137 / 158

Notes:
1. If the management module is installed in management-module bay 1, the
multiplexer expansion module must be installed in multiplexer
expansion-module bay 1.
2. If the management module is installed in management-module bay 2, the
multiplexer expansion module must be installed in multiplexer
expansion-module bay 2.
The BladeCenter HT unit can be checked with the management module Web
interface at each stage as components are removed, and will work in the minimal
configuration. If the minimal configuration does not work, do the following.
1. Check the management-module settings. See the User’s Guide that comes with
the management module.
2. Reseat the management module.
3. Install the management module into the second management-module bay.
4. Move the power module to power module bay 2.
5. Make sure that the power cords are installed correctly. See “Supplying power to
the BladeCenter HT unit” on page 6 for more information.
6. Contact IBM support.
Chapter 5. Diagnostics
119