IBM BladeCenter HT 8740, Руководство по диагностике и обслуживанию

Страница: 18 / 158

Statement 34:
CAUTION:
To reduce the risk of electric shock or energy hazards:
v
This equipment must be installed by trained service personnel in a
restricted-access location, as defined by the NEC and IEC 60950-1, First
Edition, The Standard for Safety of Information Technology Equipment.
v
Connect the equipment to a properly grounded safety extra low voltage
(SELV) source. A SELV source is a secondary circuit that is designed so
that normal and single fault conditions do not cause the voltages to exceed
a safe level (60 V direct current).
v Incorporate a readily available approved and rated disconnect device in the
field wiring.
v
See the specifications in the product documentation for the required
circuit-breaker rating for branch circuit overcurrent protection.
v
Use copper wire conductors only. See the specifications in the product
documentation for the required wire size.
v
See the specifications in the product documentation for the required torque
values for the wiring-terminal nuts.
xvi
BladeCenter HT Type 8740 and 8750: Problem Determination and Service Guide