IBM BladeCenter HT 8740, Руководство по диагностике и обслуживанию

Страница: 115 / 158

v
I/O module interposers: Pull the handle on each I/O module interposer to
the open position (see “Removing an I/O-module interposer” on page 62).
v High-speed I/O module interposers: Pull the two release handles on each
high-speed I/O module interposer to the open position (see “Removing a
high-speed I/O-module interposer tray” on page 66).
v
Management module interposers: Pull the handle on each management
module interposer to the open position (see “Removing a
management-module interposer” on page 73).
6. Remove the fan shuttle from the BladeCenter HT unit (see “Removing the fan
shuttle” on page 89).
7. Remove the upper and lower power boxes from the rear of the BladeCenter
HT chassis (see “Removing a power box” on page 92).
8. Remove the 14 phillips-head screws that secure the midplane to the shuttle.
9. Pull the midplane away from the BladeCenter HT unit.
10. If you are instructed to return the midplane, follow all packaging instructions
and use any packaging materials for shipping that are supplied to you.
Chapter 4. Removing and replacing BladeCenter HT components
97