IBM 884155U, Руководство пользователя

Страница: 91 / 210

Table 5. Switches 1-8 (continued)
Switch
number Default value
Switch
description
2 Off Power-on password override. Changing the position of this switch bypasses the
power-on password check the next time the server is turned on and starts the
Configuration/Setup Utility program so that you can change or delete the power-on
password. Move the switch back to the default position after the password is
overridden.
Changing the position of this switch does not affect the administrator password
check, if an administrator password is set.
See the User’s Guide on the IBM xSeries Documentation CD for additional
information about the power-on password.
1 Off Force power-on. When toggled to On, this switch forces the server to turn on,
overriding the power-on button.
Notes:
1. Before moving any jumpers, turn off the server; then, disconnect all power cords
and external cables. (Review Appendix B, “Safety information,” on page 153,
“Installation guidelines” on page 11, and “Turning off the server” on page 8)
2. Any system-board switch or jumper blocks that are not shown in the illustrations
in this document are reserved.
Chapter 4. Service replaceable units
81