IBM 884155U, Руководство пользователя

Страница: 59 / 210

Connecting the cables
Notes:
1. Make sure you turn off the server before connecting any cables to or
disconnecting any cables from the server or hot-plug adapter.
2. For additional cabling instructions, see the User’s Guide on the IBM xSeries
Documentation CD and the documentation that comes with the options. It might
be easier for you to route any cables before you install certain options.
3. Cable identifiers are printed on the cables that come with the server and
options. Use these identifiers to connect the cables to the correct connectors.
For example, the hard disk drive cables are labeled “HDD option.”
Two cable-restraint brackets are on the rear of the server. Route the power cords
through the power-cord restraint bracket. After you connect the cables to the
selected devices, route the cables (for example, the cables that are connected to
the I/O connectors) through the I/O cable-restraint bracket.
See the following illustrations for the locations of the input and output connectors on
the server.
Note: The USB 3 connector is on the front of the server.
Keyboard connector
Mouse connector
Serial 1 connector
Serial 2 connector
USB 1 connector
ASM
Remote Supervisor
Adapter II
SlimLine Ethernet
Video connector
Ethernet link LED
Ethernet activity LED
Power cord connector
AC power LED
DC power LED
USB 2 connector
Parallel connector
Ethernet link 2
status LED
Ethernet connectors 1 and 2
Ethernet link 1
status LED
PO
WER SUPPL
Y
FILLER
REQ
UIRED FOR
SYSTEM COOLING WITH EMPTY SLO
T
DO NO
T
THR
O
W
A
W
A
Y
A
TTENTION:
PO
WER SUPPL
Y
FILLER
REQ
UIRED FOR
SYSTEM COOLING WITH EMPTY SLO
T
DO NO
T
THR
O
W
A
W
A
Y
A
TTENTION:
Chapter 3. Installing options
49