IBM 884155U, Руководство пользователя

Страница: 72 / 210

Power reset card
Complete the following steps to remove the power reset card.
Note:
v
Read “Installation guidelines” on page 11.
v
Read Appendix B, “Safety information,” on page 153.
v
Read “Handling static-sensitive devices” on page 12.
1. Turn off the server.
2. Disconnect all external cables and power cords from the back of the server.
3. Remove the bezel (see “Removing the bezel” on page 16).
4. Remove the server cover (see “Removing the left-side cover” on page 14).
5. Disconnect and remove adapters and spacers (see “Installing or replacing an
adapter” on page 25).
6. Remove the central-fan and adapter-support bracket (see “Center-fan and
adapter-support bracket” on page 67).
7. Remove the air baffle.
8. Disconnect the power reset card cable from the system board (J42).
9. Press the tab on the front of the power reset card and lift it out from inside the
chassis.
To replace the power reset card, reverse the previous steps, threading the cable
carefully.
62
xSeries 236 Type 8841: Hardware Maintenance Manual and Troubleshooting Guide