IBM 884155U, Руководство пользователя

Страница: 80 / 210

Complete the following steps to remove the center-fan support bracket as a single
unit:
1. Disconnect the cable that is attached to the center-fans connector on the
system board (see “System-board internal connectors” on page 78).
2. Remove the center-fan support bracket.
a. Press the release tab on each end of the center-fan support bracket. There
are two latches; one at each end of the center-fan support bracket.
b. Slide the center-fan support bracket unit out of the guides; then, remove it
from the server.
Note: To reinstall the center-fan support bracket and other components that you
removed or disconnected, reverse the preceding steps. Remember to
reroute the cables that you disconnected and to reconnect the center-fan
cable to the system board (see “System-board internal connectors” on
page 78).
Adapter-support bracket
Note:
v
Read “Installation guidelines” on page 11.
v
Read Appendix B, “Safety information,” on page 153.
v
Read “Handling static-sensitive devices” on page 12.
When working with some options, you must first remove the adapter-support
bracket to access certain components or connectors on the system board.
70
xSeries 236 Type 8841: Hardware Maintenance Manual and Troubleshooting Guide