IBM 884155U, Руководство пользователя

Страница: 124 / 210

Note: See “System replaceable units” on page 144 to determine which components should be replaced by a field
service technician.
Error code/symptom FRU/action
00181000
(PCI error)
v
Adapter
v
System board
01295085
(ECC checking hardware test error)
1. System board
2. Microprocessor
01298001
(System BIOS installed on this server
does not support level of processor)
1. Ensure all microprocessors have the same cache size.
2. Microprocessor 1.
01298002
(System BIOS installed on this server
does not support level of processor)
1. Ensure all microprocessors have the same cache size.
2. Microprocessor 2.
01298101
(System BIOS installed on this server
does not support level of processor)
1. Ensure all microprocessors have the same cache size.
2. Microprocessor 1.
01298102
(System BIOS installed on this server
does not support level of processor)
1. Ensure all microprocessors have the same cache size.
2. Microprocessor 2.
I9990301
(Hard disk sector error)
1. Hard disk drive
2. SCSI backplane
3. Cable
4. System board
I9990305
(Hard disk sector error, no operating
system installed)
1. Install operating system to hard disk.
I9990650
(AC power has been restored)
1. Check cable.
2. Check for interruption of power.
3. Power cable.
Light path diagnostic errors
Note: See “System replaceable units” on page 144 to determine which components should be replaced by a field
service technician.
Diagnostics panel lit LED FRU/action
PS 1 (power supply 1 failure or removal)
Note: If this LED is blinking it indicates
that power supply 1 has been removed in
a redundant power supply configuration.
1. Power supply 1
2. System board
PS 2 (power supply 2 failure or removal)
Note: If this LED is blinking it indicates
that power supply 2 has been removed in
a redundant power supply configuration.
1. Power supply 2
2. System board
CONFIG (invalid configuration exists)
Note: Check the panel for other lit LEDs.
1. Run Configuration/Setup Utility program and make sure
microprocessors and memory are configured correctly.
2. Follow FRU/action for other lit LEDs or system-log errors.
3. System board.
114
xSeries 236 Type 8841: Hardware Maintenance Manual and Troubleshooting Guide