IBM 884155U, Руководство пользователя

Страница: 101 / 210

Diagnostic programs, error codes and messages
The server diagnostic programs are stored in electrically erasable programmable
read-only memory (EEPROM) on the system board that is shared with the BIOS
code. These programs are the primary method of testing the major components of
your server.
Diagnostic error messages indicate that a problem exists. They are not intended to
be used to identify a failing part. Troubleshooting and servicing of complex
problems that are indicated by error messages should be performed by trained
service personnel.
Sometimes the first error to occur causes additional errors. In this case, the server
displays more than one error message. Always follow the suggested action
instructions for the first error message that appears.
Error codes that might be displayed are listed at “Diagnostic error codes” on page
116.
Notes:
1. Depending on the server configuration, some of the error codes might not
appear when you run the diagnostic programs.
2. If diagnostic error codes appear that are not listed in the tables, make sure that
the server has the latest levels of BIOS, Remote Supervisor Adapter II SlimLine,
and ServeRAID code installed.
Diagnostic text message format
The diagnostic text message format is as follows:
result test_specific_string
where:
result is one of the following results:
Passed
This test was completed without any errors.
Failed
This test discovered an error.
User Aborted
You stopped the test before it was completed.
Not Applicable
You attempted to test a device that is not present in the server.
Aborted
The test could not proceed because of the server configuration.
Warning
A hardware failure did not occur; the test could not be run
because of some other problem (for example, there might be a
configuration problem, the hardware is missing or is not being
recognized, or there is a hardware problem that is not related to
the hardware currently being tested).
test_specific_string
is an error code or other information about the error.
Chapter 5. Diagnostics
91