IBM 884155U, Руководство пользователя

Страница: 53 / 210

Statement 2
CAUTION:
When replacing the lithium battery, use only IBM Part Number 33F8354 or an
equivalent type battery recommended by the manufacturer. If your system has a
module containing a lithium battery, replace it only with the same module type made
by the same manufacturer. The battery contains lithium and can explode if not
properly used, handled, or disposed of.
Do not:
v
Throw or immerse into water.
v
Heat to more than 100° C (212° F)
v
Repair or disassemble
Dispose of the battery as required by local ordinances or regulations.
Complete the following steps to replace the battery:
1. Read the safety information beginning on page v and “Installation guidelines”
on page 11.
2. Follow any special handling and installation instructions that come with the
battery.
3. Turn off the server and all attached devices and disconnect all power cords
and external cables (see “Turning on the server” on page 7); then, remove the
server cover (see “Removing the left-side cover” on page 14).
4. Remove the air baffle. See “Removing the air baffle” on page 15.
5. Disconnect any internal cables, as necessary.
6. Locate the battery connector on the system board.
Chapter 3. Installing options
43