IBM 8832L1X, Руководство по техническому обслуживанию и устранению неисправностей

Страница: 43 / 154

27
d. Center the processor over the processor socket. Align the triangle on the corner of the
processor with the triangle on the corner of the socket and carefully press the processor into
the socket.
Attention:
• Do not use excessive force when pressing the processor into the socket.
• Make sure that the processor is oriented and aligned correctly in the socket before you
try to close the lever.
e. Carefully close the lever to secure the processor in the socket.
9. Install a heat sink on the processor:
Attention:
• Do not set down the heat sink after you remove the plastic cover.
• Do not touch the thermal grease on the bottom of the heat sink. Touching the thermal grease
will contaminate it. If the thermal grease on the processor or heat sink becomes
contaminated, contact your service technician.
or
Lever closed
Lever
fully
open
Lever closed
Lever
fully
open