IBM 8832L1X, Руководство по техническому обслуживанию и устранению неисправностей

Страница: 21 / 154

5
Intel® Server Compute Blade SBX82 features
The design of your blade server takes advantage of advancements in memory management and data
storage. Your blade server uses the following features and technologies:
• Disk drive support
The blade server supports up to two 2.5-inch SCSI disk drives.
• Intel Architecture
Intel architecture technology leverages proven innovative technologies to build powerful,
scalable, reliable Intel-processor-based servers. The technology includes features such as Light
Path Diagnostics, Predictive Failure Analysis (PFA), and Advanced System Management.
• Impressive performance using the latest processor technology
Your blade server supports up to two Intel
®
Xeon
™
processors. The blade server comes with at
least one processor installed; you can install an additional processor to further enhance
performance and symmetric multiprocessing (SMP) capability.
• Integrated network environment support
The blade server comes with two integrated dual Gigabit Ethernet controllers. Each Ethernet
controller has an interface for connecting to 10/100/1000-Mbps networks through an Ethernet-
compatible switch module on the SBCE unit. The blade server automatically selects between
10BASE-T and 100/1000BASE-TX environments. Each controller provides full-duplex (FDX)
capability, which enables simultaneous transmission and reception of data on the Ethernet local
area network (LAN). The controllers support Wake on LAN technology.
• I/O expansion
The blade server comes with two connectors on the system board for an optional expansion card,
such as the Intel
®
Blade Server Fibre Channel Expansion Card or the Intel
®
Blade Server
Ethernet Expansion Card, for adding more network communication capabilities to the blade
server.
• Large system memory
The memory bus in your blade server supports up to 8GB of system memory. The memory
controller provides support for up to four industry-standard 1.8 V, 184-pin, double-data-rate
(DDR2-400), PC3200, registered synchronous dynamic random-access memory (SDRAM) with
error correcting code (ECC) DIMMs.
• Light Path Diagnostics
The Light Path Diagnostics feature provides light-emitting diodes (LEDs) to assist in isolating
problems with the blade server. An LED on the blade server control panel is lit if an unusual
condition or a problem occurs. If this happens, you can look at the LEDs on the system board to
locate the source of the problem.
• PCI Express*
PCI Express* is a fully serial interface that can be used for universal connectivity for use as a
chip-to-chip interconnect, I/O interconnect for adapter cards, and an I/O attachment point to
Gigabit networking devices. PCI Express bridges a PCI Express bus to a PCI-X bus and converts
the transactions on the PCI bus to transactions on the PCI-X bus. Using the expansion card
connector you can add additional LAN interfaces. The expansion card connector supports PCI-
X 133 and bridges PCI Express into PCI-X 133.