IBM 867413x - Eserver xSeries 330 8674, Руководство по техническому обслуживанию аппаратной части

Страница: 124 / 192

6. Slide the power supply away from the side of the chassis and lift up to remove.
PCI riser card
To remove the PCI riser card:
Note: Read“Safety information” on page 147 and “Before you begin” on page 45.
1. Power off the server/workstation.
2. Remove the cover. See “Removing the cover” on page 48.
3. Remove any adapters and put them in a safe place.
4. Disconnect cables.
5.
Gently lift up on the card to disconnect it from the system board port.
System board
To remove the system board:
Note: Read“Safety information” on page 147 and “Before you begin” on page 45.
1.
Power off the server/workstation.
2. Remove the cover. See “Removing the cover” on page 48.
3. Disconnect all cables from the system board.
4. Remove the adapter retaining latch (see “Removing a microprocessor” on
page 90).
5. Remove the microprocessors. See “Removing a microprocessor” on page 90.
6. Remove the memory modules. See “ Installing memory modules ” on page 85.
7. Remove screws from the system board.
8.
Remove the four screws from the rear of the server/workstation.
9. Pull up on the system board to remove from the chassis.
116
Hardware Maintenance Manual: xSeries 330 Type 8674, IntelliStation R Pro Type 6851, and Network Equipment Building
System Type 8674